Model No. - ELG-150 Series
Max Output Wattage (W) - 150 Watts
Output Voltage (VDC) - 12, 24, 36, 42, 48, 54 Volts
Model No. | ELG-150-12 |
ELG-150-24 | ELG-150-36 |
ELG-150-42 |
ELG-150-48 | ELG-150-54 | |
Output: | DC Voltage | 12V |
24V | 36V | 42V | 48V | 54V |
Constant Current Region | 6~12V | 12~24V | 18~36V | 21~42V | 24~48V | 27~54V | |
Rated Current | 10A | 6.25A | 4.17A | 3.57A | 3.13A | 2.8A | |
Rated Power | 200VAC~305VAC |
||||||
120W | 150W | 150.1W | 150W | 150.2W | 151.2W | ||
100VAC~180VAC | |||||||
84W | 105W | 105W | 105W | 105W | 105W | ||
Ripple & Noise (max.) | 150mVp-p | 200mVp-p | 250mVp-p | 250mVp-p | 250mVp-p | 300mVp-p | |
Voltage ADJ. Range | Adjustable for A-Type only (via built-in potentiometer) | ||||||
10.8 ~ 13.2V |
21.6 ~ 26.4V | 32.4 ~ 39.6V |
37.8 ~ 46.2V |
43.2 ~ 52.8V |
49 ~ 58V |
||
Current Adj. Range | Adjustable for A-Type only (via built-in potentiometer) | ||||||
5 ~ 10A |
3.2 ~ 6.25A | 2.1 ~ 4.17A |
1.8 ~ 3.57A |
1.56 ~ 3.13A |
1.4 ~ 2.8A |
||
Voltage Tolerance | ±3.0% | ±3.0% | ±2.5% | ±2.5% | ±2.0% | ±2.0% | |
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Load Regulation | ±2.0% | ±1.0% | ±1.0% | ±0.5% | ±0.5% | ±0.5% | |
Auxiliary DC Output | Nominal 15V(deviation 11.5~15.5V)@0.4A for BE-Type only | ||||||
Setup, Rise Time | 1600ms, 80ms/115VAC 500ms, 100ms/230VAC | ||||||
Hold up Time | 10ms/ 115VAC, 230VAC |
||||||
Input: | Voltage Range |
100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) |
|||||
Frequency Range |
47~63Hz | ||||||
Power Factor (Typ.) |
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
||||||
Total Harmonic Distortion |
THD< 20%(@load≧50%/115VC; @load≧60%/230VAC; @load≧75%/277VAC) |
||||||
Efficiency (Typ.) | 88% | 89% | 90% | 90% | 90% | 91% | |
AC Current (Typ.) | 1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC | ||||||
Inrush Current (Typ.) | COLD START 65A(twidth=550μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||||
MAX. No. of PSUs on 16A CIRCUIT BREAKER |
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | ||||||
Leakage Current | <0.75mA / 277VAC | ||||||
Protection: | Over Current | 95 ~ 108% | |||||
Constant current limiting, recovers automatically after fault condition is removed | |||||||
Short Circuit Protection | Hiccup mode, recovers automatically after fault condition is removed. | ||||||
Over Voltage | 14 ~18V | 28 ~ 34V | 41 ~ 48V | 47 ~ 54V | 54 ~ 62V | 59 ~ 68V | |
Shut down output voltage, re-power on to recover | |||||||
Over Temperature | Shut down output voltage, re-power on to recover | ||||||
Environment: | Working Temp. | Tcase=-40 ~ +90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) | |||||
Max. Case Temp | Tcase=+90℃ | ||||||
Working Humidity | 20 ~ 95% RH non-condensing | ||||||
Storage Temp., Humidity | -40 ~ +80°C, 10 ~ 95% RH | ||||||
Temp. Coefficient | ±0.03%/°C (0 ~ 60°C) | ||||||
Vibration | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||||
Safety & EMC | Safety Standards | UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved | |||||
Dali Standards | Compliance to IEC62386-101, 102, 207 for DA-Type only | ||||||
Withstand Voltage | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | ||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
EMC Emission | Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3; GB17743, GB17625.1 | ||||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) | ||||||
Others: | MTBF | 899.8K hrs min. Telcordia SR-332 (Bellcore) 313.66Khrs min. MIL-HDBK-217F (25℃) | |||||
Dimension | 219*63*35.5mm (L*W*H) | ||||||
Packing | 0.95Kg ; 16pcs/16.0kg/0.77CUFT |
Electrical Specifications | |
Dimensions | 219*63*35.5mm (L*W*H) |
Input Voltage | NA |
Model Type | Primary model - Type |
Number of Outputs | 1 |
Output Voltage | 36V |
PDF Specs | View Spec Sheet |
Wattage | 150 |
General | |
Dimmable | Dimming |
Industry Aliases | new |
ELG-150-36 Mean Well LED Power Supply
- Brand: Mean Well
- Product Code: ELG-150-36
- Availability: Call for Availability
-
$47.21
- Ex Tax: $47.21