Model No. - ELG-200 Series
Max Output Wattage (W) - 200 Watts
Output Voltage (VDC) - 12, 24, 36, 42, 48, 54 Volts
Model No. | ELG-200-12 |
ELG-200-24 | ELG-200-36 |
ELG-200-42 |
ELG-200-48 | ELG-200-54 | |
Output: | DC Voltage | 12V |
24V | 36V | 42V | 48V | 54V |
Constant Current Region | 6~12V | 12~24V | 18~36V | 21~42V | 24~48V | 27~54V | |
Rated Current | 16A | 8.4A | 5.55A | 4.76A | 4.16A | 3.72A | |
Rated Power | 200VAC~305VAC |
||||||
192W | 201.6W | 199.8W | 199.9W | 199.68W | 200.88W | ||
100VAC~180VAC | |||||||
144W | 150W | 149.76W | 149.94W | 149.76W | 150.12W | ||
Ripple & Noise (max.) | 150mVp-p | 200mVp-p | 250mVp-p | 250mVp-p | 250mVp-p | 350mVp-p | |
Voltage ADJ. Range | Adjustable for A-Type only (via built-in potentiometer) | ||||||
11.2 ~ 12.8V |
22.4 ~ 25.6V | 33.5 ~ 38.5V |
39 ~ 45V |
44.8 ~ 51.2V |
50 ~ 57V |
||
Current Adj. Range | Adjustable for A-Type only (via built-in potentiometer) | ||||||
8 ~ 16A |
4.2 ~ 8.4A | 2.78 ~ 5.55A |
2.38 ~ 4.76A |
2.08 ~ 4.16A |
1.86 ~ 3.72A |
||
Voltage Tolerance | ±3.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | ±2.0% | |
Line Regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Load Regulation | ±2.0% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
Setup, Rise Time | 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC | ||||||
Hold up Time | 10ms/ 230VAC 10ms/ 115VAC | ||||||
Input: | Voltage Range |
100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) |
|||||
Frequency Range |
47~63Hz | ||||||
Power Factor (Typ.) |
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
||||||
Total Harmonic Distortion |
THD< 20%(@load≧50%/115VC; @load≧60%/230VAC; @load≧75%/277VAC) |
||||||
Efficiency (Typ.) | 90% | 92% | 92% | 92.5% | 93% | 93% | |
AC Current (Typ.) | 1.8A / 115VAC 1.2A / 230VAC 1.0A/277VAC | ||||||
Inrush Current (Typ.) | COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||||
MAX. No. of PSUs on 16A CIRCUIT BREAKER |
4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | ||||||
Leakage Current | <0.75mA / 277VAC | ||||||
No Load/ Standby Power Consumption |
No load power consumption <0.5W for Blank / A / Dx / D-Type Standby power consumption <0.5W for B / DA-Type |
||||||
Protection: | Over Current | 95 ~ 108% | |||||
Constant current limiting, recovers automatically after fault condition is removed | |||||||
Short Circuit Protection | Hiccup mode, recovers automatically after fault condition is removed. | ||||||
Over Voltage | 13.5 ~ 18V | 27 ~ 34V | 42 ~ 49V | 47 ~ 54V | 54 ~ 63V | 60 ~ 67V | |
Shut down output voltage, re-power on to recover | |||||||
Over Temperature | Shut down output voltage, re-power on to recover | ||||||
Environment: | Working Temp. | Tcase=-40 ~ +90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) | |||||
Max. Case Temp | Tcase=+90℃ | ||||||
Working Humidity | 20 ~ 95% RH non-condensing | ||||||
Storage Temp., Humidity | -40 ~ +90°C, 10 ~ 95% RH | ||||||
Temp. Coefficient | ±0.03%/°C (0 ~ 50°C) | ||||||
Vibration | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||||
Safety & EMC | Safety Standards | UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved | |||||
Dali Standards | Compliance to IEC62386-101, 102, 207 for DA-Type only | ||||||
Withstand Voltage | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | ||||||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH | ||||||
EMC Emission | Compliance to EN55015,EN61000-3-2 Class C (@load≧50%) ; EN61000-3-3; GB17743, GB17625.1 | ||||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) | ||||||
Others: | MTBF | 826.7K hrs min. Telcordia SR-332 (Bellcore) ; 200.8Khrs min. MIL-HDBK-217F (25℃) | |||||
Dimension | 244*71*37.5mm (L*W*H) | ||||||
Packing | 1.22Kg; 12pcs / 15.2Kg / 0.72CUFT |
Electrical Specifications | |
Dimensions | 244*71*37.5mm (L*W*H) |
Input Voltage | NA |
Model Type | Primary model - Type |
Number of Outputs | 1 |
Output Voltage | 36V |
PDF Specs | View Spec Sheet |
Wattage | 108 |
General | |
Dimmable | Dimming |
Industry Aliases | new |
ELG-200-36 Mean Well LED Power Supply
- Brand: Mean Well
- Product Code: ELG-200-36
- Availability: Call for Availability
-
$47.70
- Ex Tax: $47.70