Model No. - ELG-150-C Series
Max Output Wattage (W) - 150 Watts
Rated Current - 500mA, 700mA, 1050mA, 1400mA, 1700mA, 2100mA
Model No. |
ELG-150-C500 |
ELG-150-C700 |
ELG-150-C1050 |
ELG-150-C1400 |
ELG-150-C1750 |
ELG-150-C2100 | |
Output |
Rated Current |
500mA |
700mA |
1050mA |
1400mA |
1750mA |
2100mA |
Rated Power |
200VAC~305VAC |
||||||
150W |
149.8W |
150.15W |
149.8W |
150.5W |
151.2W | ||
100VAC~180VAC |
|||||||
105W |
105W |
105W |
105W |
105W |
105W | ||
Constant Current Region |
150 ~ 300V |
107 ~ 214V |
72 ~143V |
54 ~ 107V |
43 ~ 86V |
36 ~ 72V | |
Open Circuit Voltage |
315V |
225V |
151V |
115V |
94V |
80V | |
Current ADJ. Range |
Adjustable for A-Type only (via built-in potentiometer) |
||||||
250 ~ 500mA |
350 ~ 700mA |
525 ~ 1050mA |
700 ~ 1400mA |
875 ~ 1750mA |
1050 ~ 2100mA | ||
Current Ripple |
5.0% max. @rated current |
||||||
Current Tolerance |
±5.0% |
||||||
Auxiliary DC Output |
Nominal 15V(deviation 11.5~15.5V)@0.4A for BE-Type only | ||||||
Set Up Time |
1600ms/115VAC 500ms/230VAC |
||||||
Input: |
Voltage Range |
100 ~ 305VAC 142 ~ 431VDC (Please refer to "STATIC CHARACTERISTIC" section) |
|||||
Frequency Range |
47~63Hz |
||||||
Power Factor (Typ.) |
PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load (Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section) |
||||||
Total Harmonic Distortion |
THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC) |
||||||
Efficiency (Typ.) |
92% |
92% |
92% |
91% |
91% |
91% | |
AC Current (Typ.) |
1.7A / 115VAC 0.9A / 230VAC 0.7A/277VAC |
||||||
Inrush Current (Typ.) |
COLD START 65A(twidth=485μs measured at 50% Ipeak)/230VAC; Per NEMA 410 |
||||||
MAX. No. of PSUs on 16A |
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC |
||||||
Leakage Current |
<0.75mA / 277VAC |
||||||
No Load/Standby Power Consumption |
No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / DA-Type |
||||||
Protection: |
Short Circuit |
Hiccup mode, recovers automatically after fault condition is removed | |||||
Over Voltage |
320 ~ 360V | 230 ~ 265V | 155 ~ 180V |
128 ~ 150V |
96 ~ 106V |
82 ~ 92V | |
Shut down o/p voltage, re-power on to recover |
|||||||
Over Temperature |
Shut down o/p voltage, re-power on to recover |
||||||
Environment: |
Working Temp. |
Tcase=-40 ~ +90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section) |
|||||
Max. Case Temp |
Tcase=+90℃ |
||||||
Working Humidity |
20 ~ 95% RH non-condensing |
||||||
Storage Temp., Humidity |
-40 ~ +80°C, 10 ~ 95% RH |
||||||
Temp. Coefficient |
±0.03%/°C (0 ~ 60°C) |
||||||
Vibration |
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes |
||||||
Safety & EMC |
Safety Standards |
UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved |
|||||
Dali Standards |
Compliance to IEC62386-101, 102, 207 for DA-Type only |
||||||
Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC |
||||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH |
||||||
EMC Emission |
Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3; GB17743, GB17625.1 |
||||||
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) |
||||||
Others: |
MTBF |
1098.95K hrs min. Telcordia SR-332 (Bellcore) 308.6Khrs min. MIL-HDBK-217F (25℃) |
|||||
Dimension |
219*63*35.5 mm (L*W*H) | ||||||
Packing |
0.95Kg; 16pcs / 16.0kg / 0.77CUFT |
Electrical Specifications | |
Input Voltage | NA |
Model Type | C-Type |
Number of Outputs | 1 |
Output Voltage | NA |
PDF Specs | View Spec Sheet |
Wattage | 150 |
General | |
Dimmable | Dimming |
Industry Aliases | new |
ELG-150-C1400 Mean Well LED Power Supply
- Brand: Mean Well
- Product Code: ELG-150-1400
- Availability: Call for Availability
-
$47.70
- Ex Tax: $47.70