Model No. HEP-100 Series
Max Output Wattage (W) - 100 Watts
Output Voltage (VDC) – 12, 15, 24, 36, 48, 54 Volts
Model No. |
HEP-100-12 |
HEP-100-15 |
HEP-100-24 |
HEP-100-36 |
HEP-100-48 |
HEP-100-54 | |
Output: |
DC Voltage |
12V |
15V |
24V |
36V |
48V |
54V |
Rated Current |
8.34A |
6.67A |
4A |
2.65A |
2A |
1.77A |
|
Rated Power |
100.08W |
100.05W |
96W |
95.4W |
96W |
95.58W |
|
Ripple & Noise (max.) Note 2 |
120mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
200mVp-p |
200mVp-p |
|
Voltage Adj. Range |
10.8 ~ 13.5V | 13.5 ~ 17V | 22 ~ 27V | 33 ~ 40V | 43 ~ 53V | 49 ~ 58V | |
Current Adj. Range |
Can be adjusted by internal potentiometer for A type only | ||||||
5 ~ 8.34A | 4 ~ 6.67A | 2.5 ~ 4A | 1.65 ~ 2.65A | 1.25 ~ 2A | 1.1 ~ 1.77A | ||
Voltage Tolerance Note 3 |
±1.0% |
±4.0% |
±4.0% |
±2.0% |
±1.0% |
±1.0% |
|
Line Regulation Note 4 |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Load Regulation Note 5 |
±2.0% |
±1.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Setup, Rise Time |
1200ms, 50ms/115VAC 500ms, 50ms/230VAC at full load |
||||||
Hold Up Time (typ.) |
16ms at full load 230VAC/115VAC |
||||||
Input: |
Voltage Range |
90~305VAC 127 ~ 431VDC |
|||||
Frequency Range |
47~63Hz |
||||||
Power Factor (typ.) |
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load |
||||||
Efficiency (Typ.) |
92% |
92% | 93% | 93% | 93% | 93% | |
AC Current (Typ.) |
1.2A / 115VAC 0.55A / 230VAC 0.5A / 277VAC |
||||||
Inrush Current (Typ.) |
COLD START 60A at 230VAC |
||||||
Leakage Current |
<0.75mA / 277VAC |
||||||
Protection: |
Overload |
105 ~ 125% |
|||||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
|||||||
Short Circuit |
Constant current limiting, recovers automatically after fault condition is removed |
||||||
Over Voltage |
14 ~ 17V |
18 ~ 21V |
28 ~ 34V |
41 ~ 46V |
54 ~ 63V |
59 ~ 65V |
|
Protection type : Shut down o/p voltage, re-power on to recover |
|||||||
Over Temperature |
Shut down o/p voltage, recovers automatically after temperature goes down |
||||||
Environment: |
Working Temp. |
-55 ~ +70°C (Refer to "Derating Curve") |
|||||
Working Humidity |
20 ~ 95% RH non-condensing |
||||||
Storage Temp., Humidity |
-60 ~ +85°C, 10 ~ 95% RH |
||||||
Temp. Coefficient |
±0.03%/°C (0 ~ 60°C) |
||||||
Vibration |
20 ~ 500Hz, 10G 12min. / 1cycle 72 min. each along X, Y, Z axes |
||||||
Safety & EMC |
Safety Standards |
UL60950-1, IP65 (or IP68 for HEP-100 Blank type) approved ; design refer to TUV EN60950-1 |
|||||
Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC |
||||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH |
||||||
EMC Emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
||||||
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level (surge 6KV), criteria A |
||||||
Others |
MTBF |
164.7Khrs min. MIL-HDBK-217F(25?) |
|||||
Dimension |
8.6 x 2.7 x 1.5 in (L*W*H) |
||||||
Packing |
2.5 lbs; 12pcs / 14.4Kg / 0.8CUFT |
Electrical Specifications | |
Dimensions | 8.6 x 2.7 x 1.5 in (L*W*H) |
Number of Outputs | 1 |
Output Voltage | 15V |
PDF Specs | View Spec Sheet |
Wattage | 100 |
General | |
Industry Aliases | new |
HEP-100-15
- Brand: Mean Well
- Product Code: HEP-100-15
- Availability: Call for Availability
-
$70.40
- Ex Tax: $70.40