Model No. HEP-240 Series
Max Output Wattage (W) - 240 Watts
Output Voltage (VDC) – 12, 15, 24, 36, 48, 54 Volts
Model No. |
HEP-240-12 |
HEP-240-15 |
HEP-240-24 |
HEP-240-36 |
HEP-240-48 |
HEP-240-54 |
||
Output: |
DC Voltage |
12V |
15V |
24V |
36V |
48V |
54V |
|
Rated Current |
16A |
15A |
10A |
6.7A |
5A |
4.45A |
||
Rated Power |
192W |
225W |
240W |
241.2W |
240W |
240.3W |
||
Ripple & Noise (max.) Note 2 |
150mVp-p |
150mVp-p |
150mVp-p |
250mVp-p |
250mVp-p |
350mVp-p |
||
Voltage Adj. Range |
11.2 ~ 12.8V |
14 ~ 16V |
22.4 ~ 25.6V |
33.5 ~ 38.5V |
44.8 ~ 51.2V |
50 ~ 57V |
||
Current Adj. Range |
Can be adjusted by internal potentiometer for A type only |
|||||||
8 ~ 16A |
7.5 ~ 15A |
5 ~ 10A |
3.3 ~ 6.7A |
2.5 ~ 5A |
2.23 ~ 4.45A |
|||
Voltage Tolerance Note 3 |
±2.5% |
±2.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
||
Line Regulation Note 4 |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
||
Load Regulation Note 5 |
±2.0% |
±1.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
||
Setup, Rise Time |
1000ms, 80ms/115VAC 500ms, 80ms/230VAC at full load |
|||||||
Hold Up Time (typ.) |
15ms at full load 230VAC/115VAC |
|||||||
Input: |
Voltage Range |
90~305VAC 127 ~ 431VDC |
||||||
Frequency Range |
47~63Hz |
|||||||
Power Factor (typ.) |
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.92/277VAC at full load |
|||||||
Efficiency (Typ.) |
90% |
90% |
92.5% |
92.5% |
93% |
93.5% |
||
AC Current (Typ.) |
12V |
2A / 115VAC 1.05A / 230VAC 0.9A / 277VAC |
||||||
15V~54V |
2.5A / 115VAC 1.3A / 230VAC 1.1A / 277VAC |
|||||||
Inrush Current (Typ.) |
COLD START 75A at 230VAC |
|||||||
Leakage Current |
<0.75mA / 277VAC |
|||||||
Protection: |
Overload |
105 ~ 125% |
||||||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
||||||||
Short Circuit |
Constant current limiting, recovers automatically after fault condition is removed |
|||||||
Over Voltage |
13.5 ~ 18V |
17.5 ~ 21.5V |
27 ~ 34V |
43 ~ 49V |
55 ~ 63V |
60 ~ 67V |
||
Protection type : Shut down o/p voltage with auto-recovery, re-power on to recovery |
||||||||
Over Temperature |
Shut down o/p voltage, recovers automatically after temperature goes down |
|||||||
Environment: |
Working Temp. |
-55 ~ +70°C (Refer to "Derating Curve") |
||||||
Working Humidity |
20 ~ 95% RH non-condensing |
|||||||
Storage Temp., Humidity |
-60 ~ +80°C, 10 ~ 95% RH |
|||||||
Temp. Coefficient |
±0.03%/°C (0 ~ 60°C) |
|||||||
Vibration |
20 ~ 500Hz, 10G 12min. / 1cycle 72 min. each along X, Y, Z axes |
|||||||
Safety & EMC |
Safety Standards |
UL60950-1, IP65 (or IP68 for HEP-240 Blank-Type) approved ; design refer to TUV EN60950-1 |
||||||
Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC |
|||||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH |
|||||||
EMC Emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
|||||||
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level (surge 6KV), criteria A |
|||||||
Others |
MTBF |
171.3Khrs min. MIL-HDBK-217F(25?) |
||||||
Dimension |
9.6 x 2.7 x 1.5 in (L*W*H) |
|||||||
Packing |
1.3 lbs; 12pcs / 16.6Kg / 0.84CUFT |
Electrical Specifications | |
Dimensions | 9.6 x 2.7 x 1.5 in (L*W*H) |
Number of Outputs | 1 |
Output Voltage | 12V |
PDF Specs | View Spec Sheet |
Wattage | 104 |
General | |
Industry Aliases | new |
HEP-240-12
- Brand: Mean Well
- Product Code: HEP-240-12
- Availability: Call for Availability
-
$88.70
- Ex Tax: $88.70