Mean Well Authorized Distributor since 1997

Model No. - HLG-120H-C1400A

Max Output Wattage (W) - 120 Watts

Output Voltage (VDC) - 1400 Volts

Please read!!

A - Type : IP65 rated. Constant current level can be adjusted through internal potentiometer.
B - Type : IP67 rated. and built - in 3 in 1 dimming function (1 ~ 10VDC, PWM signal, or resistance).
D - Type : (option) : IP67 rated. Timer dimming function, contact Peak to Peak for details.

Model No.		HLG-120H-C1400A	HLG-120H-C1400B	HLG-120H-C1400D
Output:	Rated Current	1400mA
	Current Accuracy	±5.0%
	Constant Current Region	54V ~ 108V
	Rated Power	151.2W
	Ripple Current	±5%
	Ripple & Noise	1Vp-p
	Current Adj. Range	Can be adjusted by internal potentiometer A type only
		700 ~ 1400mA
	Line Regulation	±1%
	Setup, Rise Time	2000ms, 80ms /115VAC at full load 1000ms 80ms / 230VAC at full load
	Hold up Time	16ms at full load 230VAC/115VAC
Input:	Voltage Range	90~305VAC 127~431VDC
	Frequency Range	47~63Hz
	Power Factor (Typ.)	PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
	Total Harmonic Distortion	THD<20% when output loading ≥ 50% at 115VAC input and output loading ≥75% at 277VAC input.
	Efficiency (Typ.)	93.5%
	AC Current (Typ.)	1.6A / 115VAC 0.8A / 230VAC 0.7A / 277VAC
	Inrush Current (Typ.)	COLD START 50A (twidth=600µS measured at 50% lpeak) at 230VAC
	Leakage Current	<0.75mA / 277VAC
Protection:	Short Circuit	Constant current limiting recovers automatically after fault condition is removed
	Over Voltage	120 ~130V
		Protection type : Shut down o/p voltage, re- power on to recover
	Over Temperature	85°C±10°C (RTH2)
		Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
Environment:	Working Temp.	-25 ~ +70°C (Refer to "Derating Curve")
	Working Humidity	10 ~ 95% RH non-condensing
	Storage Temp., Humidity	-40 ~ +80°C, 10 ~ 95% RH
	Temp. Coefficient	±0.03%/°C (0 ~ 50°C)
	Vibration	10 ~ 500Hz, 5G 12min. / 1cycle, period for 72min. each along X, Y, Z axes
Safety & EMC	Safety Standards	UL8750, CSA- C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13 EN62384 independent, IP65 or IP67 approved
	Withstand Voltage	I/P - O/P : 3.75KVAC-----I/P-FG : 2KVAC---- O/P-FG : 0.5KVAC
	Isolation Resistance	I/P - O/P, I/P-FG, O/P-FG : 100M Ohms / 500VDC / 25°C / 70% RH
	EMC Emission	Compliance to EN550515, EN61000-3-2 Class C (≥50%load) ; EN61000-3-3
	EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, heavy industry level(surge L,N-FG:4KV), criteria A
Others:	MTBF	191.1K hrs min. MIL-HDBK-217F (25°C)
	Dimension	220 x 68 x 38.8mm (LxWxH)
	Packing	1.04Kg; 12pcs / 13.5Kg / 0.8CUFT

Output
Constant Current Region	54V ~ 108V
Current Accuracy	±5.0%
Current Adj. Range	Can be adjusted by internal potentiometer A type only 700 ~ 1400mA
Hold up Time	16ms at full load 230VAC/115VAC
Line Regulation	±1%
Rated Current	1400mA
Rated Power	151.2W
Ripple & Noise	1Vp-p
Ripple Current	±5%
Setup, Rise Time	2000ms, 80ms /115VAC at full load 1000ms 80ms / 230VAC at full load
Input
AC Current (Typ.)	1.6A / 115VAC 0.8A / 230VAC 0.7A / 277VAC
Efficiency (Typ.)	93.5%
Frequency Range	47~63Hz
Inrush Current (Typ.)	COLD START 50A (twidth=600µS measured at 50% lpeak) at 230VAC
Leakage Current	<0.75mA / 277VAC
Power Factor (Typ.)	PF>0.98/115VAC, PF>0.96/230VAC, PF>0.93/277VAC at full load (Please refer to "Power Factor Characteristic" curve)
Total Harmonic Distortion	THD<20% when output loading ≥ 50% at 115VAC input and output loading ≥75% at 277VAC input.
Voltage Range	90~305VAC 127~431VDC
Protection
Over Temperature	Protection type: Shut down o/p voltage, recovers automatically after temperature goes down
Over Voltage	120 ~130V Protection type : Shut down o/p voltage, re- power on to recover 85°C±10°C (RTH2)
Short Circuit	Constant current limiting recovers automatically after fault condition is removed
Environment
Storage Temp., Humidity	-40 ~ +80°C, 10 ~ 95% RH
Temp. Coefficient	±0.03%/°C (0 ~ 50°C)
Vibration	10 ~ 500Hz, 5G 12min. / 1cycle, period for 72min. each along X, Y, Z axes
Working Humidity	10 ~ 95% RH non-condensing
Working Temp.	-25 ~ +70°C (Refer to "Derating Curve")
Safety & EMC
EMC Emission	Compliance to EN550515, EN61000-3-2 Class C (≥50%load) ; EN61000-3-3
EMC Immunity	Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, heavy industry level(surge L,N-FG:4KV), criteria A
Isolation Resistance	I/P - O/P, I/P-FG, O/P-FG : 100M Ohms / 500VDC / 25°C / 70% RH
Safety Standards	UL8750, CSA- C22.2 No. 250.12-13, ENEC EN61347-1, EN61347-2-13 EN62384 independent, IP65 or IP67 approved
Withstand Voltage	I/P - O/P : 3.75KVAC-----I/P-FG : 2KVAC---- O/P-FG : 0.5KVAC
Others
Dimension	220 x 68 x 38.8mm (LxWxH)
MTBF	191.1K hrs min. MIL-HDBK-217F (25°C)
Packing	1.04Kg; 12pcs / 13.5Kg / 0.8CUFT

HLG-120H-C1400A Mean Well LED Power Supply

Brand: Mean Well
Product Code: HLG-120H-C1400A
Available

$56.00
Ex Tax: $56.00

Qty

HLG-120H-C1400A Mean Well LED Power Supply

$56.00