web statistics
  • ELG-75-C1050 Mean Well LED Power Supply

Model No. - ELG-75-C Series

Max Output Wattage (W) - 75 Watts

Rated Current - 350mA, 500mA, 700mA, 1050mA, 1400mA

Model No.

ELG-75-C350

ELG-75-C500

ELG-75-C700

ELG-75-C1050

ELG-75-C1400

Output

Rated Current

350mA

500mA

700mA

1050mA

1400mA

Rated Power  

200VAC~305VAC

74.9W

75W

74.9W

74.55W

75.6W

100VAC~180VAC

59.85W

60W

59.5W

59.85W

60.2W

Constant Current Region

107 ~ 214V

75 ~ 150V

53 ~ 107V

35 ~ 71V

27 ~ 54V

Open Circuit Voltage

224V

158V

114V

78V

61V

Current ADJ. Range

Adjustable for A-Type only (via built-in potentiometer)

175 ~ 350mA

250 ~ 500mA

350 ~ 700mA

525 ~ 1050mA

700 ~ 1400mA

Current Ripple

5.0% max. @rated current

Current Tolerance

±5.0%

Set Up Time

500ms/115VAC,230VAC

Input:

Voltage Range

100 ~ 305VAC 142 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

Frequency Range

47~63Hz

Power Factor (Typ.)

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

Total Harmonic Distortion

THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

Efficiency (Typ.)

91%

91%

90%

90%

90%

AC Current (Typ.)

0.7A / 115VAC 0.45A / 230VAC 0.38A/277VAC

Inrush Current (Typ.)

COLD START 50A(twidth=350μs measured at 50% Ipeak) at 230VAC; Per NEMA 410

MAX. No. of PSUs on 16A
CIRCUIT BREAKER

5 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC

Leakage Current

<0.75mA / 277VAC

No Load/Standby Power

Consumption

No load power consumption <0.5W for Blank / A / Dx / D2-Type

Standby power consumption <0.5W for B / DA-Type

Protection:

Short Circuit

Hiccup mode, recovers automatically after fault condition is removed

Over Voltage

225 ~ 260V

160 ~ 190V

115 ~ 140V

80 ~ 100V

64 ~ 79V

Shut down and latch o/p voltage, re-power on to recover

Over Temperature

Shut down output voltage, re-power on to recover

Environment:

Working Temp.

Tcase=-40 ~ +85℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)

Max. Case Temp

Tcase=+85℃

Working Humidity

20 ~ 95% RH non-condensing

Storage Temp., Humidity

-40 ~ +80°C, 10 ~ 95% RH

Temp. Coefficient

±0.03%/°C (0 ~ 60°C)

Vibration

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Safety & EMC

Safety Standards

UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384;
IP65 or IP67; GB19510.1, GB19510.14 approved

Dali Standards

Compliance to IEC62386-101, 102, 207 for DA-Type only

Withstand Voltage

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

Isolation Resistance

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

EMC Emission

Compliance to EN55015,EN61000-3-2 Class C (@load≧50%) ; EN61000-3-3; GB17743, GB17625.1

EMC Immunity

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)

Others:

MTBF

1172K hrs min. Telcordia SR-332 (Bellcore) 305Khrs min. MIL-HDBK-217F (25℃)

Dimension

180*63*35.5mm (L*W*H)

Packing

0.8Kg;16pcs/13.4Kg/0.67CUFT

 

Electrical Specifications
Dimensions 180*63*35.5 mm (L*W*H)
Input Voltage NA
Model Type Primary model - Type
Number of Outputs 1
Output Voltage NA
PDF Specs View Spec Sheet
Wattage 75
General
Dimmable Dimming
Industry Aliases new

ELG-75-C1050 Mean Well LED Power Supply

  • Brand: Mean Well
  • Product Code: ELG-75-1050
  • Availability: Call for Availability
  • $47.70

  • Ex Tax: $47.70

©2024 Peak to Peak Power, Inc. All Rights Reserved. Marketing by Digital Lightbridge.