web statistics
  • ELG-100-42 Mean Well LED Power Supply

Model No. - ELG-100 Series

Max Output Wattage (W) - 100 Watts

Output Voltage (VDC) - 24, 36, 42, 48, 54  Volts

Model No. ELG-100-24
ELG-100-36
ELG-100-42
ELG-100-48 ELG-75-54
Output:  DC Voltage 24V 36V 42V 48V 54V
Constant Current Region 12~24V 18~36V 21~42V 24~48V 27~54V
Rated Current 4.0A 2.66A 2.28A 2A 1.78A
Rated Power    200VAC~305VAC
96W 95.76W 95.76W 96W 96.12W
100VAC~180VAC
70W 70W 70W 70W 70W
Ripple & Noise (max.) 200mVp-p 250mVp-p 250mVp-p 300mVp-p 350mVp-p
Voltage ADJ. Range  Adjustable for A-Type only (via built-in potentiometer)
21.6 ~ 26.4V 32.4 ~ 39.6V 37.8 ~ 46.2V 43.2 ~ 52.8V 48.6 ~ 59.4V
Current Adj. Range Adjustable for A-Type only (via built-in potentiometer)
2 ~ 4A 1.33 ~ 2.66A 1.14 ~ 2.28A 1 ~ 2A 0.89 ~ 1.78A
Voltage Tolerance ±3.0% ±2.5% ±2.5% ±2.0% ±2.0%
Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5%
Load Regulation ±1.0% ±1.0% ±0.5% ±0.5% ±0.5%
Setup, Rise Time 1000ms, 80ms/115VAC          500ms, 100ms/230VAC
Hold up Time 15ms/ 115VAC                    10ms/ 230VAC
Input: Voltage Range

100 ~ 305VAC 142 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

Frequency Range

47~63Hz
Power Factor (Typ.)

PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load

(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

Total Harmonic Distortion

THD< 20%(@load≧50%/115VC; @load≧60%/230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

Efficiency (Typ.) 88% 89% 90% 90% 91%
AC Current (Typ.) 1.1A / 115VAC 0.6A / 230VAC 0.5A/277VAC
Inrush Current (Typ.) COLD START 60A(twidth=850μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. No. of PSUs on 16A
CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
Leakage Current <0.75mA / 277VAC
Protection: Over Current 95 ~ 108%
Constant current limiting, recovers automatically after fault condition is removed
Short Circuit Protection Hiccup mode, recovers automatically after fault condition is removed.
Over Voltage 28 ~ 34V 41 ~ 48V 47 ~ 54V 54 ~ 62V 62 ~ 72V
Shut down output voltage, re-power on to recover
Over Temperature Shut down output voltage, re-power on to recover
Environment: Working Temp. Tcase=-40 ~ +90℃(Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Max. Case Temp Tcase=+90℃
Working Humidity 20 ~ 95% RH non-condensing
Storage Temp., Humidity -40 ~ +80°C, 10 ~ 95% RH
Temp. Coefficient ±0.03%/°C (0 ~ 60°C)
Vibration 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Safety & EMC Safety Standards UL8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1, GB19510.14; IP65 or IP67 approved
Dali Standards Compliance to IEC62386-101, 102, 207 for DA-Type only
Withstand Voltage I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC Emission Compliance to EN55015,EN61000-3-2 Class C (@load≧60%) ; EN61000-3-3; GB17743, GB17625.1
EMC Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV)
Others: MTBF 978.2K hrs min. Telcordia SR-332 (Bellcore) 282.9Khrs min. MIL-HDBK-217F (25℃)
Dimension 199*63*35.5mm (L*W*H)
Packing 0.85kg; 16pcs/14.2kg/0.72CUFT
Electrical Specifications
Dimensions 199*63*35.5mm (L*W*H)
Input Voltage NA
Model Type Primary model - Type
Number of Outputs 1
Output Voltage 42V
PDF Specs View Spec Sheet
Wattage 100
General
Dimmable Dimming
Industry Aliases new

ELG-100-42 Mean Well LED Power Supply

  • Brand: Mean Well
  • Product Code: elg-100-42
  • Availability: Call for Availability
  • $47.70

  • Ex Tax: $47.70

©2024 Peak to Peak Power, Inc. All Rights Reserved. Marketing by Digital Lightbridge.