Mean Well Authorized Distributor since 1997
Model No. MDR-10-24
Max Output Wattage (W) - 10 Watts
Output Voltage (VDC) - 24 Volts
Model No. | MDR-10-5 | MDR-10-12 | MDR-10-15 | MDR-10-24 | |
Output: | DC Voltage | 5V | 12V | 15V | 24V |
Rated Current | 2A | 0.84A | 67A | 0.42A | |
Current Range | 0~2A | 0~0.84A | 0~0.67A | 0~0.42A | |
Rated Power | 10W | 10W | 10W | 10W | |
Ripple & Noise (max.) | 80mVp-p | 120mVp-p | 120mVp-p | 150mVp-p | |
Voltage Tolerance | ±5.0% | ±3.0% | ±3.0% | ±2.0% | |
Line Regulation | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
Load Regulation | ±5.0% | ±3.0% | ±3.0% | ±2.0% | |
Setup, Rise Time | 500ms, 30ms / 230VAC ---- 1000ms, 30mas / 115VAC at full load |
||||
Hold up Time | 120ms/230VAC - - -25ms/115VAC at full load | ||||
Input: | Voltage Range | 85~264VAC 120~370VDC | |||
Frequency Range |
47~63Hz | ||||
Efficiency (Typ.) | 77% | 81% | 81% | 84% | |
AC Current (Typ.) | 0.33A / 115VAC------0.21A / 230VAC | ||||
Inrush Current (Typ.) | COLD START 35A/115VAC 70A/230VAC |
||||
Leakage Current | <1mA / 240VAC | ||||
Protection | Overload | Above 105% rated output power | |||
Protection type:Hiccup mode, recovers automatically after fault condition is removed | |||||
Over Voltage | 5.75 ~ 6.75V | 13.8 ~16.2V | 17.25~20.25V | 27.6~32.4V | |
Protection type: Shut down o/p voltage, re-power on to recover |
|||||
FUNCTION | DC OK ACTIVE SIGNAL(max.) | 3.75 ~ 6V / 50mA |
9 ~ 13.5V / 40mA |
11.5 ~ 16.5V / 40mA | 18 ~ 27V / 20mA |
Environment: | Working Temp. | -20 ~ +70°C (Refer to "Derating Curve") | |||
Working Humidity | 20 ~ 90% RH non-condensing | ||||
Storage Temp., Humidity | -40 ~ +85°C, 10 ~ 95% RH | ||||
Temp. Coefficient | ±0.03%/°C (0 ~ 50°C) | ||||
Vibration | Component: 10 ~ 500Hz, 2G 10min. / 1cycle, period for 60min. each along X, Y, Z axes; Mounting: Compliance to IEC600068-2-6 |
||||
Safety & EMC | Safety Standards | UL508, TUV EN60950-1 approved | |||
Withstand Voltage | I/P - O/P : 3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC | ||||
Isolation Resistance | I/P - O/P,I/P-FG, O/P-FG: 100M Ohms / 500VDC / 25°C / 70% RH | ||||
EMC Emission | Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024,EN55024,EN61000-6-1,EN61204-3,light industry level, criteria A |
||||
EMC Immunity | Compliance to EN61000-4-2,3,4,5,6,8,11 EN55024, EN61000-6-1, light industry level, criteria A | ||||
Others: | MTBF | 584Khrs min. MIL-HDBK-217F (25°C) | |||
Dimension | 22.5 x 90 x 100mm (LxWxH) | ||||
Packing | 0.17Kg; 72pcs / 13.2Kg / 0.91CUFT |
Electrical Specifications | |
Dimensions | 22.5 x 90 x 100 mm |
Input Voltage | 85~264VAC |
Number of Outputs | 1 |
Output Voltage | 24V |
PDF Specs | View Spec Sheet |
Wattage | 10 |
General | |
Industry Aliases | new |
MDR-10-24 Mean Well Power Supply
- Brand: Mean Well
- Product Code: MDR-10-24
- Availability: In Stock
-
$11.00
- Ex Tax: $11.00