Mean Well Authorized Distributor since 1997
Model No. HEP-600 Series
Max Output Wattage (W) - 600 Watts
Output Voltage (VDC) – 12, 15, 20, 24, 30, 36, 42, 48, 54 Volts
Model No. |
HEP-600-12 |
HEP-600-15 |
HEP-600-20 |
HEP-600-24 |
HEP-600-30 |
HEP-600-36 |
HEP-600-42 |
HEP-600-48 |
HEP-600-54 |
|
Output: |
DC Voltage |
12V |
15V |
20V |
24V |
30V |
36V |
42V |
48V |
54V |
Rated Current |
40A |
36A |
28A |
25A |
20A |
16.7A |
14.3A |
12.5A |
11.2A |
|
Rated Power |
480W |
540W |
560W |
600W |
600W |
601.2W |
600.6W |
600W |
604.8W |
|
Ripple & Noise (max.) Note 2 |
150mVp-p |
150mVp-p |
150mVp-p |
150mVp-p |
200mVp-p |
250mVp-p |
250mVp-p |
250mVp-p |
350mVp-p |
|
Voltage Adj. Range |
10.2 ~ 12.6V |
12.7 ~ 15.8V |
17 ~ 21V |
20.4 ~ 25.2V |
25.5 ~ 31.5V |
30.6 ~ 37.8V |
35.7 ~ 44.1V |
40.8 ~ 50.4V |
45.9 ~ 56.7V |
|
Current Adj. Range |
Can be adjusted by internal potentiometer |
|||||||||
20 ~ 40A |
18 ~ 36A |
14 ~ 28A |
12.5 ~ 25A |
10 ~ 20A |
8.3 ~ 16.7A |
7.1 ~ 14.3A |
6.2 ~ 12.5A |
5.6 ~ 11.2A |
||
Voltage Tolerance Note 3 |
±3.0% |
±2.0% |
±1.5% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
±1.0% |
|
Line Regulation Note 4 |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Load Regulation Note 5 |
±2.0% |
±1.5% |
±1.0% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
±0.5% |
|
Setup, Rise Time |
500ms, 80ms at full load 230VAC/115VAC |
|||||||||
Hold Up Time (typ.) |
15ms at full load 230VAC/115VAC |
|||||||||
Input: |
Voltage Range |
90~305VAC 127 ~ 431VDC |
||||||||
Frequency Range |
47~63Hz |
|||||||||
Power Factor (typ.) |
PF>0.98/115VAC, PF>0.95/230VAC, PF>0.93/277VAC at full load |
|||||||||
Efficiency (Typ.) |
93% |
94% |
95% |
95% |
95.5% |
95.5% |
96% |
96% |
96% |
|
AC Current (Typ.) |
7A / 115VAC 3.3A / 230VAC 2.9A / 277VAC |
|||||||||
Inrush Current (Typ.) |
COLD START 70A(twidth=1000us measured at 50% Ipeak) at 230VAC |
|||||||||
Leakage Current |
<0.75mA / 277VAC |
|||||||||
Protection: |
Overload |
105 ~ 125% |
||||||||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
||||||||||
Short Circuit |
Constant current limiting, recovers automatically after fault condition is removed |
|||||||||
Over Voltage |
13 ~ 16V |
16.5 ~ 20.5V |
22 ~ 26V |
26 ~ 30V |
32.5 ~ 36.5V |
39.5 ~ 43.5V |
46 ~ 50V |
52.5 ~ 56.5V |
59 ~ 63V |
|
Protection type : Shut down and latch off o/p voltage, re-power on to recover |
||||||||||
Over Temperature |
Shut down and latch off o/p voltage, re-power on to recover |
|||||||||
Function: |
Remote On/Off Control |
Power on : "Hi" >2 ~ 5V or Open circuit Power off : "Low" <0 ~ 0.5V or Short circuit | ||||||||
5V Standby |
5VSB : 5V@0.5A ; tolerance±5%, ripple : 100mVp-p(max.) | |||||||||
Environment: |
Working Temp. |
-40 ~ +70°C (Refer to "Derating Curve") |
||||||||
Working Humidity |
20 ~ 95% RH non-condensing |
|||||||||
Storage Temp., Humidity |
-40 ~ +85°C, 10 ~ 95% RH |
|||||||||
Temp. Coefficient |
±0.03%/°C (0 ~ 60°C) |
|||||||||
Vibration |
20 ~ 500Hz, 10G 12min. / 1cycle 72 min. each along X, Y, Z axes |
|||||||||
Safety & EMC |
Safety Standards |
UL60950-1, TUV EN60950-1 approved |
||||||||
Withstand Voltage |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC |
|||||||||
Isolation Resistance |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25?/ 70% RH |
|||||||||
EMC Emission |
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 |
|||||||||
EMC Immunity |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level, criteria A |
|||||||||
Others |
MTBF |
76.9Khrs min. MIL-HDBK-217F(25?) |
||||||||
Dimension |
11 x 5.7 x 2 in (L*W*H) |
|||||||||
Packing |
8.6 lbs; 4pcs / 16.6Kg / 0.9CUFT |
Electrical Specifications | |
Dimensions | 11 x 5.7 x 2 in (L*W*H) |
Number of Outputs | 1 |
Output Voltage | 54V |
PDF Specs | View Spec Sheet |
Wattage | 600 |
General | |
Industry Aliases | new |
HEP-600-54
- Brand: Mean Well
- Product Code: HEP-600-54
- Availability: Call for Availability
-
$216.00
- Ex Tax: $216.00